1:USB2.0 interface;Support Serial Wire Debug (SWD);Support Serial Wire Viewer (SWV);
2 :Download speeds up to 720kb/s;DCC mode up to 800 kb/s;
Seamless integration with IAR Workbench, Keill, ADS, RVDS;
No external power supply, power through USB;JTAG speed is 12 MHZ;
3 :Automatic kernel identification; Automatic speed recognition; Support adaptive clock; Can monitor all JTAG signals and automatically adapt to the target board voltage;
Support multi-core debugging; * Completely plug and play;
Includes 20-pin standard JTAG connector; Supports 1.2V-5V target board voltage; Provide 5V 300mA for external power supply (control output by command); 3.3V 300mA for external power supply (achieved by J3 jumper); Includes USB and 20-pin flat cable; Random distribution support software to observe and modify memory J-Mem; Support embedded cache tracking Embedded Trace Buffer (ETB) Optional online programming, programming FLASH software RDI plugin makes ARM suitable for any RDI compatible debugger such as ADS, Relview, IAR, etc.
4 :With RDI Flash DLL can be used to program and burn FLASH under RDI; With GDB Server, it can be debugged in GDB environment.
5:Support for operation system:
6:Support for
Features
1. This emulator supports ARM7/ARM9/ARM11,
Cortex-A5/A7/A8/A9/A12/A15/A17,
Cortex-M0/M1/M3/M4/M7/M23/M33,
Cortex-R4/R5/R8 core
Microchip POC32MX/PIC32MZ
Renesas RX110/RX200/RX610/RX621/
RX62N/RX62T/RX630/RX631/RX63N/
RX63T/RX64M/.....
2.USB2.0 interface (full speed)
3. Automatic core recognition
4. Support almost all development environments such as ADS, IAR, KEIL, RVDS, WINARM, REALVIEW, etc.
5. Support Windows 32-bit, 64-bit system
6. The download speed is fast (the specific speed varies according to the firmware version)
7. Support JTAG, SW, virtual serial port
8. Support target board IO voltage 1.2-5V DC
9. Power supply 5V 300mA (control output by command)
10. Original firmware, firmware fully automatic upgrade
11. Support Serial Wire Debug (SWD)
12. Support Serial Wire Viewer (SWV)
13. Speed automatic identification
14. Support adaptive clock
15. Can monitor all JTAG signals and automatically adapt to the target board voltage
16. Support multi-core debugging
17. Fully plug and play
18. Includes 20-pin standard JTAG connector
19. Includes USB and 20-pin flat cable
20. Random distribution support software for viewing and modifying memory J-Mem
21. Support embedded cache tracking Embedded Trace Buffer (ETB)
22. Optional online programming, less FLASH: J-Flash
23. The RDI plugin uses J-Link for any RDI compatible debugger such as ADS, Relview, IAR, etc.
24. With RDI Flash DLL can be used to program and program FLASH under RDI
25. With GDB Server, you can debug in GDB environment.
26.ARM development only weapon - v9.6 , full-featured ARM emulator, downloader, stable and fast performance